10ft new (one-trip) shipping container, gentian blue RAL 5010, three-quarter viewGenerated illustration
Illustrative image: the delivered container is not the one shown. Request photos of the proposed unit before confirming your order.

One-trip10 ftRef. CB-10DV-NEUF

10ft new (one-trip) shipping container

The small size for storage where a 20ft won't fit.

External dimensions

Length
2.972 m
Width
2.438 m
Height
2.591 m
Volume
≈ 15.87 m³, before fit-out
Internal floor area
≈ 6.65 m², before fit-out

Container price

Price on request · AUD

Delivery and unloading must be included in your quotation: Request delivered price. Delivery to Australian states and territories, subject to supplier, route and site confirmation is subject to postcode and access confirmation.

Availability on request: the catalogue does not represent live stock.

Request current photos and a condition report for the proposed unit.

Request a quoteDiscuss your requirements

Enquiry terms: a request is not an order and no payment is taken.

  • Factory-built 10ft, new one-trip condition
  • Handling marks from its first journey may be present
  • Typical external length 2.99m; confirm actual dimensions

10ft container dimensions and specifications

Typical reference values for this size; the finished dimensions vary by manufacturer and, for a cut-down container, by conversion. Obtain the actual unit specification before agreeing to buy.

Reference specifications: 10ft new (one-trip); confirm the actual unit
External, L × W × H2,971.8 × 2,438.4 × 2,590.8 mm
Internal, L × W × H2,844.8 × 2,336.8 × 2,387.6 mm
Door, width × height2,336.8 × 2,260.6 mm
Calculated internal floor area≈ 6.65 m², before fit-out
Calculated internal volume≈ 15.87 m³, before fit-out

Price and delivered total

Quote required for this specification. Request a quotation in AUD including applicable GST, delivery, unloading and any mandatory charges. Availability and the total depend on the proposed unit, postcode and site access. An enquiry does not place an order.

Request delivered priceRequest a quoteDiscuss your requirements

Compare 10ft container conditions

Compare models for this nominal size; the factory-built one-trip and used cut-down units have different construction histories. Prices are confirmed in an individual AUD quotation covering the container, applicable taxes, delivery and unloading. Confirm the actual unit, availability and complete delivered total for your postcode.

Comparison of conditions and model specifications for the 10ft container
ConditionContainer price (AUD)WatertightnessFreight suitability
One-tripPrice on request · AUDConfirm unit conditionNot established by this grade
10ft used wind and watertight containerPrice on request · AUDConfirm unit conditionNot established by this grade

Is this container right for your project?

Factory-built 10ft shipping container in new one-trip condition, as offered by some Australian suppliers. It has travelled from manufacture and may have handling marks; it is not a never-used unit or a used container cut down to size. Typical external dimensions: 2.99m long, 2.44m wide and 2.59m high. Confirm the proposed unit's specification.

Where a 20ft won't fit

A nominal 10ft unit may suit a small storage site. Before choosing a yard, garden or position beside a building, confirm local planning requirements, setbacks, fire separation and any development or building permits. Have vehicle access, ground bearing capacity, local drainage, wind and ground conditions and the support design assessed for the actual unit and stored load.

A standard design

Corrugated steel walls, doors at one end and a timber floor. Confirm the actual unit's condition, lifting points and assessed capacity before lifting or stacking it; the original container design does not establish the safety of a damaged or altered unit.

Factory-built, one-trip condition

Built as a 10ft unit and transported from manufacture. This Australian new/one-trip specification can have handling marks; it is different from a used container cut down to 10ft. Confirm the build and transport history of the actual unit.

10ft container delivery: access and unloading

Enquire about delivery to Australian states and territories, subject to supplier, route and site confirmation. Coverage, lead time, transport and unloading charges depend on the postcode and site assessment. Request delivered price and confirm the full amount before agreeing to buy. Islands, remote locations and northern communities may require separate transport arrangements.

Allow for a footprint of about 2.99 × 2.44 m, door opening and the proposed vehicle and lifting equipment. Ask the delivery team to assess gate width, turning space, overhead obstructions, ground bearing capacity and outrigger space. Confirm the actual unit weight and lifting points; access and crane reach cannot be approved from container dimensions alone.

  1. 1. Your request“Request delivered price”, “Request a quote” or “Discuss your requirements”: you provide the delivery postcode and town, and your contact details.
  2. 2. Our confirmationRequest confirmation of the actual unit, contracting seller, availability, full delivered price and terms in a written quotation.
  3. 3. DeliveryReview the full quotation and the seller’s terms before agreeing to buy. Confirm site suitability and delivery arrangements separately.

Questions about the 10ft new (one-trip) container

What is the price of a 10ft new (one-trip) container?
Quote required for this specification. Request a quotation in AUD including applicable GST, delivery, unloading and any mandatory charges. Availability and the total depend on the proposed unit, postcode and site access. An enquiry does not place an order.
Where do you deliver, and how much does delivery cost?
You can enquire about delivery to Australian states and territories, subject to supplier, route and site confirmation; availability must be confirmed for your postcode. Delivery and unloading costs depend on your postcode, truck access and unloading method. Ask for a written quotation including applicable GST, delivery, unloading and any mandatory charges after access and the planned location have been checked. Tasmania, islands and remote sites may require separate transport arrangements.
What needs to be prepared on site?
Confirm land-use approval and any building permits with the local authority. Agree load-bearing ground, foundations or supports for local soil, wind and drainage conditions, vehicle access and the unloading plan with the supplier and a competent site professional. Mention overhead power lines, narrow gates, slopes and buried services. A generic footprint is not a foundation design or lift plan.
Can I see the container before confirming?
Request recent photos and, where possible, an inspection of the proposed unit before agreeing to buy. For a used container, they show the real condition of the doors, floor and walls.
What colours are available?
Colour preferences shown are gentian blue (RAL 5010), reseda green (RAL 6011), light grey (RAL 7035), anthracite grey (RAL 7016). Select a preference to include it in your enquiry. Actual availability and any repainting charge must be confirmed in the quotation.
One-trip or new: what is the difference?
Australian suppliers commonly use ‘new’ to describe one-trip containers. We label that condition explicitly: the unit has travelled from manufacture and may have handling marks. It is different from a genuinely never-used unit. Ask for the actual unit's build and transport history and condition report.

You may also like

10ft container guide

Dimensions, uses and points to check on the small size.

Read the guide

New or one-trip: how to choose

Condition, journey history and points to confirm before buying.

Read the guide

All containers for sale

10, 20 and 40ft, new, one-trip, cargo-worthy or used. Compare model specifications and request the complete delivered price in AUD.

View the shop

Price on request · AUD

Request a quote