10ft used wind and watertight container, three-quarter viewGenerated illustration
Illustrative image: the delivered container is not the one shown. Request photos of the proposed unit before confirming your order.

Used wind and watertight10 ftRef. CB-10DV-OCC

10ft used wind and watertight container

The compact used size for storage where a 20ft container won't fit.

External dimensions

Length
2.972 m
Width
2.438 m
Height
2.591 m
Volume
≈ 15.87 m³, before fit-out
Internal floor area
≈ 6.65 m², before fit-out

Container price

Price on request · AUD

Delivery and unloading must be included in your quotation: Request delivered price. Delivery to Australian states and territories, subject to supplier, route and site confirmation is subject to postcode and access confirmation.

Availability on request: the catalogue does not represent live stock.

Request current photos and a condition report for the proposed unit.

Request a quoteDiscuss your requirements

Enquiry terms: a request is not an order and no payment is taken.

  • Nominal 10ft cut-down storage container; confirm finished dimensions
  • Wind and watertight for storage
  • Confirm refurbishment, repainting and lockbox in the written scope
  • Freight approval and stacking capacity are not assumed

10ft container dimensions and specifications

Typical reference values for this size; the finished dimensions vary by manufacturer and, for a cut-down container, by conversion. Obtain the actual unit specification before agreeing to buy.

Reference specifications: 10ft used wind and watertight; confirm the actual unit
External, L × W × H2,971.8 × 2,438.4 × 2,590.8 mm
Internal, L × W × H2,844.8 × 2,336.8 × 2,387.6 mm
Door, width × height2,336.8 × 2,260.6 mm
Calculated internal floor area≈ 6.65 m², before fit-out
Calculated internal volume≈ 15.87 m³, before fit-out

Price and delivered total

Quote required for this specification. Request a quotation in AUD including applicable GST, delivery, unloading and any mandatory charges. Availability and the total depend on the proposed unit, postcode and site access. An enquiry does not place an order.

Request delivered priceRequest a quoteDiscuss your requirements

Compare 10ft container conditions

Compare models for this nominal size; the factory-built one-trip and used cut-down units have different construction histories. Prices are confirmed in an individual AUD quotation covering the container, applicable taxes, delivery and unloading. Confirm the actual unit, availability and complete delivered total for your postcode.

Comparison of conditions and model specifications for the 10ft container
ConditionContainer price (AUD)WatertightnessFreight suitability
10ft new (one-trip) containerPrice on request · AUDConfirm unit conditionNot established by this grade
Used wind and watertightPrice on request · AUDConfirm unit conditionNot established by this grade

Is this container right for your project?

Used 10ft wind and watertight storage container, cut down and reconditioned from a larger used unit, with repainting and a lockbox to be specified in the quotation. Nominal 10ft size: actual length, doors and internal dimensions depend on the conversion. Confirm the offered specification; the reference dimensions do not establish freight approval or stacking capacity.

Where a 20ft won't fit

A nominal 10ft unit may suit a small storage site. Before choosing a yard, garden or position beside a building, confirm local planning requirements, setbacks, fire separation and any development or building permits. Have vehicle access, ground bearing capacity, local drainage, wind and ground conditions and the support design assessed for the actual unit and stored load.

Confirm how the 10ft unit was built

A used 10ft storage unit may be cut down from a larger shell. Obtain its construction history, finished dimensions, door design and condition report; do not assume that freight certification or stacking capacity applies to a shortened or otherwise modified unit.

Used watertight, for dry storage

WWT describes wind and watertight storage condition. It does not certify freight suitability or prevent condensation. Confirm the supplier’s inspection and any warranty for the actual unit.

10ft container delivery: access and unloading

Enquire about delivery to Australian states and territories, subject to supplier, route and site confirmation. Coverage, lead time, transport and unloading charges depend on the postcode and site assessment. Request delivered price and confirm the full amount before agreeing to buy. Islands, remote locations and northern communities may require separate transport arrangements.

Allow for a footprint of about 2.99 × 2.44 m, door opening and the proposed vehicle and lifting equipment. Ask the delivery team to assess gate width, turning space, overhead obstructions, ground bearing capacity and outrigger space. Confirm the actual unit weight and lifting points; access and crane reach cannot be approved from container dimensions alone.

  1. 1. Your request“Request delivered price”, “Request a quote” or “Discuss your requirements”: you provide the delivery postcode and town, and your contact details.
  2. 2. Our confirmationRequest confirmation of the actual unit, contracting seller, availability, full delivered price and terms in a written quotation.
  3. 3. DeliveryReview the full quotation and the seller’s terms before agreeing to buy. Confirm site suitability and delivery arrangements separately.

Questions about the 10ft used wind and watertight container

What is the price of a 10ft used wind and watertight container?
Quote required for this specification. Request a quotation in AUD including applicable GST, delivery, unloading and any mandatory charges. Availability and the total depend on the proposed unit, postcode and site access. An enquiry does not place an order.
Where do you deliver, and how much does delivery cost?
You can enquire about delivery to Australian states and territories, subject to supplier, route and site confirmation; availability must be confirmed for your postcode. Delivery and unloading costs depend on your postcode, truck access and unloading method. Ask for a written quotation including applicable GST, delivery, unloading and any mandatory charges after access and the planned location have been checked. Tasmania, islands and remote sites may require separate transport arrangements.
What needs to be prepared on site?
Confirm land-use approval and any building permits with the local authority. Agree load-bearing ground, foundations or supports for local soil, wind and drainage conditions, vehicle access and the unloading plan with the supplier and a competent site professional. Mention overhead power lines, narrow gates, slopes and buried services. A generic footprint is not a foundation design or lift plan.
Can I see the container before confirming?
Request recent photos and, where possible, an inspection of the proposed unit before agreeing to buy. For a used container, they show the real condition of the doors, floor and walls.
Cargo-worthy, wind and watertight used or as-is: what's the difference?
Cargo-worthy describes a unit offered for freight use: verify inspection, current CSC examination status and carrier acceptance. WWT describes wind and watertight storage condition, not shipping certification. As-is means condition needs careful assessment; ask for a written report. Applicable consumer rights still apply.

You may also like

10ft container guide

Dimensions, uses and points to check on the small size.

Read the guide

Used container: points to check

Watertightness, floor, doors and documents before buying.

Read the guide

All containers for sale

10, 20 and 40ft, new, one-trip, cargo-worthy or used. Compare model specifications and request the complete delivered price in AUD.

View the shop

Price on request · AUD

Request a quote