PREPARATION SHEET — AUSTRALIAN WORKSITE FACILITIES
ContainerFox Australia · 2 October 2026
To be completed and attached to your supplier enquiry.

1. THE SITE
Street address, suburb/town, state or territory and Australian postcode:
Contact for delivery:
Desired commissioning date:
Expected duration, possible extension:
Maximum number of people on site at any one time / team composition:
Uses: office / changing room / meal or break room / toilets / other:
Council or territory authority, actual land and intended use:
Employer / principal contractor where applicable / other duty holders:
Applicable state or territory WHS framework, or Victorian OHS framework:
Working days, hours and shifts; start and end of construction:
Existing facilities: owner's agreement, access and opening hours:

FACILITIES TO ASSESS UNDER THE WORKSITE RULES
Identify the governing state or territory law and locally approved facilities
code, including any construction-specific rules. Victoria uses its OHS framework.
Confirm the actual workforce, shifts, fixtures, privacy and safe access before
selecting facilities. There is no national toilet-count calculation in this sheet.
A supplier's capacity label does not establish legal adequacy. Mobile or temporary
work does not automatically remove the need for suitable and accessible facilities.
Toilets: required type and count, privacy, accessibility, siting and safe access.
Washing: required water supply, temperature, soap and hygienic drying.
Showers/decontamination: assess tasks, contaminants and exposed workers; unknown
exposure or user numbers remain unresolved. Check any specialist requirements.
Drinking: potable water source, protection, replenishment and hygienic use.
Changing/storage: workwear, wet gear, privacy and separate contaminated items.
Meals/breaks: peak users, furniture, shelter, cooling/heating and ventilation.
Cleaning, sanitary waste, tank servicing and records where required.
Heat, shade, wet-season or flood access, remote servicing and backup supply;
include alpine cold or frost protection where relevant to the actual site.

2. THE MODULES
Purchase or rental:
List of rooms and desired capacity for each:
Number of modules and configuration proposed by the supplier:
Furniture, heating, ventilation and equipment included:
Supplier drawing attached (reference, date, dimensions, openings):

3. THE GROUND AND ACCESS
Site plan, boundaries and available area attached:
Gate, bends, slope and overhead obstacles:
Truck parking area and distance to installation location:
Photos attached:
Ground type, level, supports: to be validated by the relevant parties.
Traffic constraints, pedestrian and emergency access:
Zoning, development approval, building/trade permits and inspections to confirm:

4. THE SERVICES
Available drinking water, location of point:
Available electricity, connection location, voltage, phase, frequency and
equipment requirements confirmed with the supplier and appropriately licensed
electrical professional for the jurisdiction and work:
Available drainage or autonomous solution to be priced:
Distances and routing of connections:
If autonomous: filling, emptying, energy, frequency of interventions:

5. THE SERVICES TO BE PRICED
Outward transport / collection at end of rental:
Unloading and lifting / assembly:
Ground preparation / supports:
Connections / commissioning:
Cleaning / maintenance / consumables:
Responsible person and check frequency during use:
Tank emptying and water replenishment frequency:
Fault response and replacement facilities during breakdown or relocation:
Extension conditions, notice period and return:
For each item: included scope, amount in AUD, whether GST is included or added
where applicable, exclusions and responsible party. Use the same tax basis when
comparing offers; an unknown amount is not zero.

6. THE DOCUMENTS TO OBTAIN BEFORE INSTALLATION
Dimensioned drawing of the configuration actually ordered.
Manufacturer's instructions for supports, handling and assembly.
Drawing of openings and connection points.
Validation of siting and organization with site managers.
Quote detailing inclusions, exclusions and responsibilities.

ABOUT THE DXF / SVG OUTLINE PROVIDED ON THE WEBSITE
It represents only an external footprint of approximately
5,980 × 2,400 mm (approximately 19 ft 7.4 in × 7 ft 10.5 in),
to be adapted to the dimensions of the selected module.
DXF AC1021 (AutoCAD 2007), drawing units millimetres; layers FOOTPRINT and
ANNOTATIONS. Set the import units to millimetres to preserve the drawing scale.
Drawn independently by ContainerFox on 8 September 2026.
This outline does not show doors, services, supports or clearances.
It does not replace the drawing of the ordered model or installation validation.
For a DWG, request the exact model file from the supplier.

Confirm council or territory planning controls separately from building approval
and the NCC edition, local variations and transitions adopted for the application.
Container size, mobility, rental duration or a CSC plate alone does not establish
a planning or building exemption. Licensed trade work, lawful wastewater disposal,
transport and lifting require their own project checks.
Confirm site-specific approvals and workplace requirements with the responsible
authority. This checklist prepares an enquiry; it does not certify compliance.

Related website guidance:
/au/site-welfare/regulations
/au/guides/shipping-container-building-permits
/au/container-delivery